A simple 2x4 rack that keeps firewood off the ground. Finished size 48 × 14 × 36 in. About 2–3 hours for a first build, 4 boards to buy.
Quick facts
| Plan | PS-09, in The Garage Starter Collection |
| Level | 2 of 3 (Confident beginner) |
| Finished size | 48 × 14 × 36 in |
| First build | About 2–3 hours |
| Parts / boards / screws | 13 parts, 4 boards to buy, 44 screws |
| Wood | Pressure-treated or cedar 2x4 |
Parts list
| Part | Name | Qty | Board | Length |
|---|---|---|---|---|
| A | Long base rail | 2 | 2x4 | 48" |
| B | Base cross member | 3 | 2x4 | 11" |
| C | Upright | 4 | 2x4 | 36" |
| D | End tie | 4 | 2x4 | 11" |
Lengths are finished lengths. Boards are listed by nominal size; see the actual lumber sizes. The plan also gives the shopping list by board length and a cutting diagram.
Materials and tools
Hardware
- Exterior screws, 3 in (rated for treated lumber) x 44
Tools
- Miter saw, circular saw or hand saw
- Drill/driver with a pilot-hole and countersink bit
- Tape measure, speed square and pencil
- Clamps (two or more)
- 80 and 120 grit sandpaper
What the plan includes
- Shopping list by board length and a cutting diagram, so you buy once
- Dimensioned drawings and an exploded view with lettered parts
- Step-by-step assembly, with a 3D view of every step
- Square Checks: the exact numbers to measure as you build
- Cut tags and a maker’s label to print
- A Letter edition to print and a Phone Edition to read in the garage
Before you build
- Stack the wood evenly and keep the stack no higher than the uprights. Do not lean or climb on the rack.
- Wear gloves and a dust mask when cutting pressure-treated lumber, wash your hands afterwards, and never burn the offcuts.
- Use screws rated for treated lumber (coated or stainless): plain steel corrodes.
- Wear safety glasses and hearing protection when cutting, and a dust mask when sanding.
- Always pre-drill before driving screws near the end of a board, to avoid splitting the wood.
- Clamp or firmly hold the workpiece before cutting and keep your hands out of the cut line.
- This plan has been modeled and cross-checked in 3D, but it has not yet been physically built and tested. Dry-fit the parts before you drive screws and use the Square Checks as you go.
Our plans are modeled and checked in 3D and have not yet been built and tested. Dry-fit before you drive screws.
Frequently asked questions
How long does the Firewood Rack take to build?
We estimate 2–3 hours for a first build.
How many boards do I need for the Firewood Rack?
The shopping list in the plan is 4 boards, listed by length, with a cutting diagram.
What wood is the Firewood Rack made from?
Pressure-treated or cedar 2x4.
What size is the Firewood Rack?
The finished size is 48 × 14 × 36 in.
Get the Firewood Rack plan
The Firewood Rack is plan PS-09 in The Garage Starter Collection: 12 beginner plans, 4 guides and a Start Here guide. One payment of $27, instant download, 14-day money-back guarantee.
See the collectionNew to this? Try the free Box Ledge Shelf plan first, or read how to read a cut list.