A clean, hollow ledge shelf that mounts to wall studs. Finished size 36 × 7¼ × 4¼ in. About 1.5–2 hours for a first build, 2 boards to buy.
Quick facts
| Plan | PS-02, in The Garage Starter Collection |
| Level | 1 of 3 (Beginner) |
| Finished size | 36 × 7¼ × 4¼ in |
| First build | About 1.5–2 hours |
| Parts / boards / screws | 5 parts, 2 boards to buy, 22 screws |
| Wood | Pine, fir or poplar (indoor) |
Parts list
| Part | Name | Qty | Board | Length |
|---|---|---|---|---|
| A | Shelf top | 1 | 1x8 | 36" |
| B | Back rail (to the wall) | 1 | 1x4 | 36" |
| C | Front face | 1 | 1x4 | 36" |
| D | End block | 2 | 1x4 | 5 3/4" |
Lengths are finished lengths. Boards are listed by nominal size; see the actual lumber sizes. The plan also gives the shopping list by board length and a cutting diagram.
Materials and tools
Hardware
- Wood screws #8 x 1-5/8 in x 18
- Wood screws for studs, 3 in x 4
- Wood glue
Tools
- Miter saw or hand saw
- Drill/driver with a pilot-hole bit
- Tape measure, speed square, level and pencil
- Stud finder
- Wood glue
- 120 grit sandpaper
What the plan includes
- Shopping list by board length and a cutting diagram, so you buy once
- Dimensioned drawings and an exploded view with lettered parts
- Step-by-step assembly, with a 3D view of every step
- Square Checks: the exact numbers to measure as you build
- Cut tags and a maker’s label to print
- A Letter edition to print and a Phone Edition to read in the garage
Before you build
- A decorative shelf for light loads. It is not rated or tested for heavy books or tools.
- Always screw into wall studs. Drywall anchors are not reliable for carrying load.
- Wear safety glasses and hearing protection when cutting, and a dust mask when sanding.
- Always pre-drill before driving screws near the end of a board, to avoid splitting the wood.
- Clamp or firmly hold the workpiece before cutting and keep your hands out of the cut line.
- This plan has been modeled and cross-checked in 3D, but it has not yet been physically built and tested. Dry-fit the parts before you drive screws and use the Square Checks as you go.
Our plans are modeled and checked in 3D and have not yet been built and tested. Dry-fit before you drive screws.
Frequently asked questions
How long does the Box Ledge Shelf take to build?
We estimate 1.5–2 hours for a first build.
How many boards do I need for the Box Ledge Shelf?
The shopping list in the plan is 2 boards, listed by length, with a cutting diagram.
What wood is the Box Ledge Shelf made from?
Pine, fir or poplar (indoor).
What size is the Box Ledge Shelf?
The finished size is 36 × 7¼ × 4¼ in.
Get the Box Ledge Shelf plan
The Box Ledge Shelf is plan PS-02 in The Garage Starter Collection: 12 beginner plans, 4 guides and a Start Here guide. One payment of $27, instant download, 14-day money-back guarantee.
See the collectionNew to this? Try the free Box Ledge Shelf plan first, or read how to read a cut list.